Model | REVO VM II Rack Embedded Inverter | |||||
2KVA/48V | 3KVA/48V | 4KVA/48V | 5KVA/48V | 6KVA/48V | ||
Power(W) | 1800W | 2700W | 3600W | 4500W | 5400W | |
Normal battery voltage | 48VDC | |||||
Utility Model | Input wave | Pure sine wave | ||||
Normal input voltage | 230Vac | |||||
Input voltage range | 120-280VAC | |||||
High voltage trip/Restart | 280VAC/270VAC | |||||
Maximum input voltage | 280VAC | |||||
Input frequency | 50/60HZ(Auto Recognition) | |||||
Maximumcharging current | 60A(10-60A) | |||||
Efficiency | ≥95% | |||||
Inverter mode | Waveform | Sine wave | ||||
Inverter output voltage | 230Vac±2%(220Vac、240Vac) | |||||
Output frequency | 50/60HZ±1Hz | |||||
Output power factor | 0.9 | |||||
Utility switch battery switching time | ≤10ms | |||||
Battery to utility switch time | ≤10ms | |||||
Efficiency | ≥92% | |||||
Inverter overload | 101-120%<Load,Turn off the output after 20s; | |||||
121-150%<Load,Turn off the output after 10s; | ||||||
Load>150%,Turn off the output after 1s | ||||||
Protective function | Undervoltage protection, overcharge protection, overload protection, over temperature protection, short circuit protection | |||||
Battery | Battery voltage | 48.0VDC | ||||
Cold start voltage | 46.0VDC | |||||
Battery low voltage alarm recovery | 44.0VDC | |||||
Battery high voltage alarm voltage | 62.0VDC | |||||
Overcharge voltage | 60.0VDC | |||||
Battery low pressure alarm point | 36.0-50.0VDC | |||||
Battery low voltage shutdown voltage | 36.0-50.0VDC | |||||
Fast charging voltage | 48.0-60.0VDC | |||||
Floating charge voltage | 48.0-60.0VDC | |||||
Other | Communication Interface | RS232/USB | ||||
Maximum number of parallels | 9 units | |||||
Shape | 2Usize(L*W*H)(2-3KVA) | 482*433.6*92mm | ||||
3Usize(L*W*H)(4-6KVA) | 482*433.6*131.8mm | |||||
Environment | Working environment | 0-55℃ | ||||
Storage environment | -15 to 60 ℃ |